Leveling casters are multifunctional casters that integrate movement and fixation. The following precautions must be taken during use, otherwise it may cause damage to the casters, equipment, and personnel.
1. Load capacity and installation quantity
The selection of Leveling casters is determined by the movement and load of the equipment. If more than 4 casters are used, the weight of the object may only be concentrated on 2 casters. So even if more than four casters are installed, they may not be able to withstand more weight. It is recommended that the weight of the object should not exceed the recommended load of four casters, as if the weight is large, exceeding the recommended weight of four casters can easily cause damage to the casters.
2. Installation and usage methods
Install using seamless bonding between bolts and nuts. After selecting the product model, pay attention to the same and installable distance between the top plate, hole spacing, size, screw and other processing equipment surfaces of the selected product and the selected product.
3. Speed and obstacles
When moving according to the characteristics of the product, the flat ground should not exceed 1km/H, and the moving range should be within 50 meters. After an interval of 5 minutes, use it again. When passing obstacles, the casters should be gently lifted or moved to avoid collisions. Otherwise, the rubber base will come into contact with the ground, causing the screws to fall off, making it difficult to adjust the height effect.
Post time: May-09-2023